E Grip III Adhesive

Description

E-Grip III Flooring Adhesive is a revolutionary zero VOC flooring adhesive to install rubber flooring and acoustic underlayments to the subfloor. The low odor, one-component urethane adhesive is formulated specifically for use with the Iso-Step® rubber floor underlayment family of surfacing products. It features excellent trowability and improved tack properties, making it easy to apply and create flat, concealed seams. E-Grip adhesive has been specifically engineered to be solvent-free. With a moisture-cured, no-mix, non-sag and permanently elastic formula, it provides excellent adhesion to elastomers, concrete, and wood in both indoor and outdoor applications.

FEATURES:

Easy to trowel apply
Solvent Free
No mixing required
Excellent curing cycle
Very low odor
Non-flammable
Zero-VOC formula (SCAQMD Rule#1168)
Meets Collaborative for High Performance Schools (CHPS) Low-Emitting Materials criteria (CA Section 01350)
TECHNICAL INFORMATION FOR E-GRIP III ADHESIVE:

Size: 4 gallon
Adhesive type: Single component polyurethane
Color: Grey
Intended Use: Flooring adhesive for interior installations
Antimicrobial: Yes
Adhesive Cure System: Moisture-cured
Freeze/Thaw Stability: Stable (Protect from freezing)
VOC Content: 0 lbs./gal (calculated)
Solvents: 0 lbs./gal (calculated)
Maximum Relative Humidity: 85% per ASTM F-2170
Application Temperature: 40 degrees F to 60 degrees F
Flashpoint: > 500 degrees F
Shelf Life: 12 months
Working Time: 30-40 minutes
COVERAGE
Trowel Size Trowel Type Approximate Coverage
1/16″ x 1/32″ x 5/64″ U-notch 120 sq. ft/gal
1/16″ x 1/16″ x 1/16″ Square notch 95 sq. ft/gal
1/8″ x 1/8″ x 1/8″ Square notch 60 sq. ft/gal
Coverage shown is for estimating purposes only.
Actual job site coverage may vary according to substrate conditions and setting practices.
HEALTH & HAZARD RATINGS
NFPA* HMIS**
Health 1 1
Fire 0 0
Reactivity 0 0
Protective Equipment None C
*National Fire Protection Association
**Hazardous Materials Identification System